Ethernet Distributed I/O
System Module: up to
8 4-20mA or Discrete Industrial I/O points over Ethernet
- Interface with Radio or
Model DIN-IOE (-1, -2,
-3, -4, -5 versions)
Distributed I/O Radio System module is used to build out distributed industrial I/O points
(precision 4-20 mA, discrete, relay) across a
facility or region
linked by Synetcom's
900 MHz or
2.4 GHz Ethernet radio
products. One radio
is required per site and connects to the I/O
System using the radio's Ethernet port.
Multiple I/O System modules can be built out from
a single radio using a standard hub.
Distributed I/O is easy with multiple radios and
systems at many locations.
Distributed I/O Radio Interface System modules are
available with several standard I/O types and
counts. They are each configured with an
IP address and matched to another I/O
System module located anywhere on the network with a
destination IP address setting, configured using
the browser interface. No
other configuration is needed.
This approach lets you
start with a small system and add additional I/O
points and remote sites without disrupting